Hayabusa Bunka HAP-40 180mm (7.1")
The Hayabusa Bunka HAP-40 180mm (7.1") pairs sleek design with exceptional sharpness and durability for precise, effortless cutting. Made from ultra-hard HAP-40 steel (66-67 HRC), it delivers exceptional sharpness and long-lasting edge retention with minimal maintenance. Its versatile bunka shape and comfortable wenge wood octagonal handle make it perfect for precise slicing of meat, fish, and vegetables.Ā
With this knife, frequent sharpening becomes a thing of the past, as its superb edge retention ensures long-lasting performance. If you prefer a low-maintenance knife that doesn't compromise on quality and performance, the Hayabusa Bunka HAP-40 180mm is the perfect choice for you.
|
Fun fact: Hayabusa bunka shares its name with the peregrine falcon (ćć¤ććµ), the fastest member of the animal kingdom. This knife may not reach speeds upwards of 350 km/h, but chopping with it will feel just as fast. |
BLADE SHAPE:
The bunka features a distinctive angled tip, ideal for precise piercing and controlled cutting tasks. Its wide, flat blade profile facilitates efficient food transfer, while the moderately curved edge supports a versatile rocking motion for rapid chopping. The blade geometry excels at slicing, dicing, and mincing a variety of ingredients, including meat, fish, and vegetables, making it a highly functional tool for professional and home kitchens alike.
STEEL:
This knifeās hard core is made of a somewhat exotic and currently one of the most mysterious and attractive steels produced in Japan (at least as far as kitchen knives are concerned): Hitachiās HAP-40 steel that fits into the category of modern and technologically advanced steels. HAP-40 is fine-grained enough to sharpen very well, and knives from this steel keep their sharpness 3-5 times longer than traditional knives. An interesting fact is that, considering it is a powder steel, it has an minimal content of chromium (around 4%) and can react as a high-carbon steel in specific circumstances.
LAMINATION:
The core layer consisting of the harder HAP-40 steel was sandwiched between two layers of softer steel. This technique is calledĀ san-maiĀ and is used to protect the hard (but delicate) core from outside factors and physical impacts, which could lead to breakage.
GEOMETRY:
It has aĀ double bevel (symmetrical) blade.Ā The cutting edge is sharpened to a 50/50 angle and stays sharp even after hours of constant use.
BLADE FINISH:
The minimalistic-looking, highly polished (also calledĀ migakiĀ finish - see articleĀ Blade Construction: Blade FinishĀ for more) blade is extremely thin, which allows the user to work precisely even with the smallest pieces of ingredients.Ā
HANDLE:
The knife features an octagon Japanese (Wa) style handle made out of wenge wood, complemented by an epoxy ferrule. The octagon shape of the handle provides a comfortable and secure grip, allowing for precise control during use. Wenge wood is known for its durability and attractive grain pattern, making it a popular choice for knife handles. The epoxy ferrule adds strength and stability to the handle, ensuring long-lasting performance.
Original: $292.85
-65%$292.85
$102.50More Images
Hayabusa Bunka HAP-40 180mm (7.1")
The Hayabusa Bunka HAP-40 180mm (7.1") pairs sleek design with exceptional sharpness and durability for precise, effortless cutting. Made from ultra-hard HAP-40 steel (66-67 HRC), it delivers exceptional sharpness and long-lasting edge retention with minimal maintenance. Its versatile bunka shape and comfortable wenge wood octagonal handle make it perfect for precise slicing of meat, fish, and vegetables.Ā
With this knife, frequent sharpening becomes a thing of the past, as its superb edge retention ensures long-lasting performance. If you prefer a low-maintenance knife that doesn't compromise on quality and performance, the Hayabusa Bunka HAP-40 180mm is the perfect choice for you.
|
Fun fact: Hayabusa bunka shares its name with the peregrine falcon (ćć¤ććµ), the fastest member of the animal kingdom. This knife may not reach speeds upwards of 350 km/h, but chopping with it will feel just as fast. |
BLADE SHAPE:
The bunka features a distinctive angled tip, ideal for precise piercing and controlled cutting tasks. Its wide, flat blade profile facilitates efficient food transfer, while the moderately curved edge supports a versatile rocking motion for rapid chopping. The blade geometry excels at slicing, dicing, and mincing a variety of ingredients, including meat, fish, and vegetables, making it a highly functional tool for professional and home kitchens alike.
STEEL:
This knifeās hard core is made of a somewhat exotic and currently one of the most mysterious and attractive steels produced in Japan (at least as far as kitchen knives are concerned): Hitachiās HAP-40 steel that fits into the category of modern and technologically advanced steels. HAP-40 is fine-grained enough to sharpen very well, and knives from this steel keep their sharpness 3-5 times longer than traditional knives. An interesting fact is that, considering it is a powder steel, it has an minimal content of chromium (around 4%) and can react as a high-carbon steel in specific circumstances.
LAMINATION:
The core layer consisting of the harder HAP-40 steel was sandwiched between two layers of softer steel. This technique is calledĀ san-maiĀ and is used to protect the hard (but delicate) core from outside factors and physical impacts, which could lead to breakage.
GEOMETRY:
It has aĀ double bevel (symmetrical) blade.Ā The cutting edge is sharpened to a 50/50 angle and stays sharp even after hours of constant use.
BLADE FINISH:
The minimalistic-looking, highly polished (also calledĀ migakiĀ finish - see articleĀ Blade Construction: Blade FinishĀ for more) blade is extremely thin, which allows the user to work precisely even with the smallest pieces of ingredients.Ā
HANDLE:
The knife features an octagon Japanese (Wa) style handle made out of wenge wood, complemented by an epoxy ferrule. The octagon shape of the handle provides a comfortable and secure grip, allowing for precise control during use. Wenge wood is known for its durability and attractive grain pattern, making it a popular choice for knife handles. The epoxy ferrule adds strength and stability to the handle, ensuring long-lasting performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Hayabusa Bunka HAP-40 180mm (7.1") pairs sleek design with exceptional sharpness and durability for precise, effortless cutting. Made from ultra-hard HAP-40 steel (66-67 HRC), it delivers exceptional sharpness and long-lasting edge retention with minimal maintenance. Its versatile bunka shape and comfortable wenge wood octagonal handle make it perfect for precise slicing of meat, fish, and vegetables.Ā
With this knife, frequent sharpening becomes a thing of the past, as its superb edge retention ensures long-lasting performance. If you prefer a low-maintenance knife that doesn't compromise on quality and performance, the Hayabusa Bunka HAP-40 180mm is the perfect choice for you.
|
Fun fact: Hayabusa bunka shares its name with the peregrine falcon (ćć¤ććµ), the fastest member of the animal kingdom. This knife may not reach speeds upwards of 350 km/h, but chopping with it will feel just as fast. |
BLADE SHAPE:
The bunka features a distinctive angled tip, ideal for precise piercing and controlled cutting tasks. Its wide, flat blade profile facilitates efficient food transfer, while the moderately curved edge supports a versatile rocking motion for rapid chopping. The blade geometry excels at slicing, dicing, and mincing a variety of ingredients, including meat, fish, and vegetables, making it a highly functional tool for professional and home kitchens alike.
STEEL:
This knifeās hard core is made of a somewhat exotic and currently one of the most mysterious and attractive steels produced in Japan (at least as far as kitchen knives are concerned): Hitachiās HAP-40 steel that fits into the category of modern and technologically advanced steels. HAP-40 is fine-grained enough to sharpen very well, and knives from this steel keep their sharpness 3-5 times longer than traditional knives. An interesting fact is that, considering it is a powder steel, it has an minimal content of chromium (around 4%) and can react as a high-carbon steel in specific circumstances.
LAMINATION:
The core layer consisting of the harder HAP-40 steel was sandwiched between two layers of softer steel. This technique is calledĀ san-maiĀ and is used to protect the hard (but delicate) core from outside factors and physical impacts, which could lead to breakage.
GEOMETRY:
It has aĀ double bevel (symmetrical) blade.Ā The cutting edge is sharpened to a 50/50 angle and stays sharp even after hours of constant use.
BLADE FINISH:
The minimalistic-looking, highly polished (also calledĀ migakiĀ finish - see articleĀ Blade Construction: Blade FinishĀ for more) blade is extremely thin, which allows the user to work precisely even with the smallest pieces of ingredients.Ā
HANDLE:
The knife features an octagon Japanese (Wa) style handle made out of wenge wood, complemented by an epoxy ferrule. The octagon shape of the handle provides a comfortable and secure grip, allowing for precise control during use. Wenge wood is known for its durability and attractive grain pattern, making it a popular choice for knife handles. The epoxy ferrule adds strength and stability to the handle, ensuring long-lasting performance.
